Diesel Components logo-header
turbo kit

Learn How To Install A Turbo Kit

learn-how-to-install-a-turbo-kit

You may have your essential turbocharger installation process under control; however, these tips are extraordinary to keep close by while you’re installing a turbo kit or merely jumping into some standard engine upkeep so you can be sure you’re taking care of business right. What’s more, if following these tips prompts the requirement for another part or pack, you can always reach out to the experts at Diesel Components Inc.

Understand the reason for turbo failure in the first place:

Very frequently, individuals find that their turbocharger has fizzled and essentially hop in and install a new turbo kit without searching out the cause for it. While a turbocharger is a thing that can just fail because of overuse, various other issues can prompt turbo wreck. Some issues are poor servicing, exhaust confinements, or leakages.

All things considered, engine oil contamination is another significant reason for turbo failure. The bearings in a turbo take significantly more damage from contaminated oil than other engine bearings primarily because of the high RPMs found in a turbocharger under boost conditions. Contingent upon the specific turbo, max RPMs can run from 80k to 200k. This is the reason frequent oil changes are so basic.

Change engine oil and air filter before installing a turbo kit:

This is critical to guarantee that no air confinements or oil contamination issues are there at the hour of your diesel engine turbo installation.

Check and supplant worn boost hoses and pipes

It’s essential to ensure the inlet hoses and pipes are in great condition, so you don’t get leakages by determining the status of their condition as a significant aspect of your standard engine service. Any boost leakages can prompt push bearing failure in the new turbo. It’s additionally imperative to ensure the clamps and bolts are of the right kind and installed effectively to abstain from coming free/sneaking off under boost conditions.
If you need to replace any boost pipes, connect with Diesel Components Inc for expert support.

Remove tops or attachments that may have been set in the oil filter during assembly:

This may appear to be quite obvious, yet it’s something that regularly gets disregarded during diesel engine turbo installation. Time and again, a pristine turbo is lost because of installing it without removing either of its plugs. This can easily lead to turbo failure due to the absence of enough lubrication. The inability to evacuate the top in the oil filter will cause the turbo to flood with oil and develop a leak on the inlet, exhaust side, or both.
If you spot some traces of oil, there is nothing to panic about. It is regular to find some oil on the exhaust side and boost tubes. This is normal in many applications that vent crankcase fumes into the system. Obviously, despite everything, clean out as much of this oil as expected when you’re installing a turbocharger.

If you still need assistance, it would be best if you get your turbo kit installed by the Diesel Components Inc.